Operating Specifications
- Rated Load Capacity
- 11021lb
- Maximum Lift Height
- 45ft
- Load at Maximum Height - Stabilizers Down
- 7000lb
- Load at Maximum Height - Stabilizers Up
- 4000lb
- Maximum Forward Reach
- 30.25ft
- Load at Maximum Reach - Stabilizers Down
- 3000lb
- Load at Maximum Reach - Stabilizers Up
- 1000lb
- Top Travel Speed
- 20mile/h
- Outside Turning Radius - Over Tires
- 12.86ft
- Drawbar Pull 74.5 kW
- 22037lb
- Maximum Lift Height - Stabilizers Up
- 43.5ft
- Maximum Lift Height - Stabilizers Down
- 45ft
Engine
- Engine Model
- Cat® C3.4B (meets U.S. EPA Tier 4 Interim Emission Standards)
- Bore
- 3.9in
- Stroke
- 4.3in
- Displacement
- 207.5in³
- Maximum Torque
- 420 N·m/1,400 rpm
- Gross Power - ISO 14396
- 101HP
Tires
- Standard
- 14.00-24 16PR TG-02
Hydraulic System
- Maximum System Pressure
- 3626psi
- Maximum Pump Flow
- 39.63gal/min
- Pump Type
- Variable displacement load sensing axial piston pump
- Auxiliary Hydraulic Supply - Intermittent
- 21.13gal/min
- Auxiliary Hydraulic Supply - Continuous
- 15.85gal/min
Service Refill Capacities
- Fuel Tank
- 39.63gal (US)
- Hydraulic Tank
- 23.78gal (US)
Transmission Speeds
- Forward - 1
- 3.6mile/h
- Forward - 2
- 6.7mile/h
- Forward - 3
- 15.2mile/h
- Forward - 4
- 20mile/h
- Reverse - 1
- 3.4mile/h
- Reverse - 2
- 6.7mile/h
- Reverse - 3
- 14.9mile/h
Boom Performance
- Boom Up
- 13.7s
- Boom Down
- 14.6s
- Tele In
- 19.1s
- Tele Out
- 16.6s
- Crowd Forward - Dump
- 4.8s
- Crowd Backward
- 4.7s
- Combined - Up and Out
- 28s
- Combined - Down and In
- 19s
- Bucket Breakout Force - ISO 8313
- 21356lb
- Boom Breakout Force
- 14162lb
Weights
- Operating Weight - With Carriage and Forks
- 24890lb
Brakes
- Parking Brakes
- Mechanical on front axle
- Service Brakes
- Servo assisted on front axle
Sound
- Exterior Sound - 74.5 kW Engine
- 106dB(A)
IMPORTANT
Rated lift capacities shown are with machine equipped with carriage and pallet forks. The machine must be level on a firm surface with undamaged, properly inflated tires as specified by the manufacturer. Machine specifications and stability are based on rated lift capacities at specific boom angles and boom lengths. (If specifications are critical, the proposed application should be discussed with your dealer.) DO NOT exceed rated lift capacity loads, as unstable and dangerous machine conditions will result. DO NOT tip the machine forward to determine the allowable load. Use only JLG approved attachments with proper material handler model/attachment load capacity charts displayed in the operator's cab. OSHA requires all rough terrain forklift operators be trained according to OSHA 29 CFR 1910.178 (l). Due to continuous product improvements, machine specifications and/or equipment changes may be made without prior notification. This machine meets or exceeds ANSI/ITSDF B56.6-2005 as originally manufactured for intended applications.